Skip to content
(920) 655-2193|Serving Green Bay & Northeast Wisconsin
Rise & Grind Concrete
Get My Price
Concrete leveling · Porches

Porch Slab & Landing Leveling

3D render: a covered porch slab settled away from the house, its roof post hanging above the slabPost lifted off the slab3D render
The short answer

A concrete porch settles because its slab sits on the backfill beside the foundation, while the house sits on footings at least 48 inches down. If the slab is solid, we lift it level with polyurethane foam through 5/8-inch holes, bring it back against the wall and seal the gap. Porches carrying roof posts, or with a hollow space underneath, get a closer look from your photos first.

By Rob Diederich, owner · Updated
Check first
Solid, hollow, posts?
Time on site
1–3 hours
Use it
Same day
Warranty
5-year written warranty
3D render of a covered porch slab settled away from the house with its roof posts hanging off the slab, before and after foam lifting — afterPosts bearing again
3D render of a covered porch slab settled away from the house with its roof posts hanging off the slab, before and after foam lifting — beforePost lifted off the slab
3D render
The porch slab comes back up to the house, the roof posts bear on it again, and the wall joint is sealed. Drag the slider.

Porch leveling at a glance

What sankThe porch slab or landing, which sits on backfill beside the foundation; the house sits on footings at least 48 inches below grade
Check firstSolid slab or hollow underneath, and whether roof posts bear on it
Holes5/8 inch, through the landing, kept off the edges and away from post bases
GoalLevel, back against the wall, pitched slightly away from the door
Time on site1–3 hours
Use itSame day
Then sealThe joint at the house and around any posts
Footing depth from Wisconsin Admin. Code SPS 321.16.

Signs your porch needs lifting

  • A gap opening between the porch slab and the house wall.
  • The landing tipping forward, or the top step sitting below the threshold.
  • Roof posts that have lifted off the slab, or a beam that looks like it's sagging toward a post.
  • Cracks across the slab with one side lower than the other.
  • Water running toward the door or standing on the landing after rain.
  • A hollow sound when you walk across the slab, which means there's a void under it.

How to check a sinking porch

  1. 1Look along the house wallA gap between the slab and the wall that's wider at the top than at the bottom means the porch is tipping away from the house. Stick painter's tape across it and date it; torn tape next season means it's still moving.
  2. 2Set a level on the landingPoint it straight out from the door. A porch should fall slightly away from the door. If you have to raise the end nearest the house to center the bubble, rain is running at the foundation.
  3. 3Look at every post baseDaylight under a post, or a post hanging above the slab, means the slab dropped out from under the roof. Photograph each one up close.
  4. 4Walk it and listenA dull, hollow sound under a solid porch slab means empty space below. On a porch built hollow, that space belongs there, so check the next step before reading anything into the sound.
  5. 5Look at the sideA concrete face that runs down to the ground is a solid porch. A block or brick wall with a vent, a small door or a crawlspace access is a hollow one.

Why porches settle

A porch is poured against the house on the soil that was dug out for the basement and pushed back in. That fill settles for years. Roof runoff lands on and around the porch, the gap at the wall opens, water runs into it, and the slab keeps dropping.

Settling backfill

A porch is poured against the house on the soil that was dug out for the basement and pushed back in. That fill settles for years, and the porch settles with it.

Fix: Foam fills the voids and stiffens the zone under the slab without adding weight.

Water in the wall gap

Once the porch pulls away from the house, roof runoff goes straight into the gap and keeps softening the soil underneath.

Fix: Lifting closes the gap; sealing it keeps it closed.

Freeze-thaw

Clay-heavy Green Bay soil holds water. Every winter it freezes, swells and thaws softer, loosening the base a little more each year.

Fix: Sealed joints keep water out of the base, which is what freezes.

Solid, hollow, or carrying the roof?

Three things change how we approach a porch. A solid slab on fill lifts like any other slab. A porch with a hollow space underneath, common on older homes and sometimes with a crawlspace or cold cellar below, can't be fixed by filling a void that's supposed to be there; that one needs a look at how the slab is supported. And when roof posts bear on the slab, the lift has to be slow and even so the posts, the beam and the roof come up together. A photo of the side of the porch, the post bases and any cracks tells us which you have.

What you seeWhat it isWhat happens next
Concrete face down to the ground, no posts on the slabA solid slab on fillIt lifts like any other slab
Roof posts standing on the slabA solid slab carrying the roofLifted slowly from several holes so the slab, posts and beam rise together
Posts or columns on their own footingsThe slab sank and the roof didn'tThe slab is lifted up to meet them and the joint around each base is sealed
Block or brick side wall with a vent or access doorA hollow porch, sometimes over a cold cellarNot a foam job. It needs a look at how the slab is supported
A wood floor on posts or piersA framed porchA carpenter or deck builder
3D cutaway of a covered porch: the slab settled and tipped away from the house over a hollow, its roof post left hanging, then the hollow filled with foam and the slab back up against the wall and under the post — afterFoam-filled; post bearing
3D cutaway of a covered porch: the slab settled and tipped away from the house over a hollow, its roof post left hanging, then the hollow filled with foam and the slab back up against the wall and under the post — beforeHollow; post hanging
3D render
Under a covered porch: the fill settled and the slab tipped away from the house, leaving the roof post hanging above it. Foam fills the hollow and brings the slab back against the wall and up under the post.

Steps are usually poured separately from the porch, so they settle separately. We lift both in one visit, the porch first so the steps can be set to meet it. Steps on their own are covered under front steps and stoops.

How we lift a porch, step by step

  1. 1Check the porch, then set the lineWe confirm the slab is solid, look at any roof posts bearing on it, and set a line to the threshold with a slight fall away from the door.
  2. 2Drill 5/8″ holes, set the portsDime-sized holes go through the slab a few feet apart, kept off the edges and corners where concrete is weakest. A plastic injection port is tapped into each one.
  3. 3Lift it back to the houseFoam fills the space under the slab, then raises the outer edge in small steps so the porch tips back toward the wall and the gap closes, and the slab comes back up under the roof posts.
  4. 4Patch and seal the wall jointHoles are grouted and the joint against the house is sealed, along with the base of any posts, so water stops running in behind the porch.

3D renders with the ground cut away, simplified to fewer holes than a real job. Most residential jobs take a few hours, and you can walk on the slab when we pack up.

Getting a porch ready

  • Clear furniture, planters and anything heavy off the slab.
  • Leave a path for a hose from the driveway to the porch.
  • Tell us if a railing is fastened to both the porch and the house wall. The porch end will move and the house end won't.
  • Roof posts and railings stay where they are. You don't need to be home.

When a porch needs a carpenter or a new slab instead

  • It's hollow underneath. A porch over a cold cellar or crawlspace is a slab carried by the walls around it. The space below is supposed to be there, so filling it isn't the fix.
  • The sag is in the framing. If the posts stand on their own footings, or the slab is still level, a sagging roof is a carpenter's job.
  • A post was already shimmed, or the beam has pulled off a post. A carpenter may need to be involved before the slab comes back up. We'll tell you from the photos.
  • The slab is in many pieces or crumbling. That one is replaced, and the posts are shored while it's done.
  • It's a wood porch. Foam lifting is for poured concrete on the ground.

Why lift a porch instead of replacing it?

Replacing a porch slab under a roof means shoring the posts, breaking out concrete against the house, and pouring in a tight spot. A solid porch that settled can usually be lifted in an afternoon with the roof never touched.

Fraction
of what tearing out and pouring new concrete costs
Same day
Walk on it when we pack up, not days later.
No demo
No jackhammers, no dumpster, no torn-up lawn or landscaping.
5/8″ holes
Dime-sized and patched flush. No new slab that won't match.
Stays up
Foam adds almost no weight and doesn't wash out like soil.
Warranty
5-year re-lift warranty, in writing on your quote before you approve it.

Replacement timing is typical; a contractor's schedule and the weather can stretch it. New-concrete cure times from Concrete Network.

What porch leveling costs

A porch is usually one or two sections plus its steps, so most land near the job minimum. See the leveling cost guide.

Porch jobTypical price
Small porch or landing$300–$600
Larger porch of one or two slabs, about 150 sq ft$600–$1,500
Job minimum$300
Steps lifted in the same visitOn the same quote
Sealing the joint at the house and around posts$5–$10 per foot
From our price sheet. A porch carrying roof posts takes longer on site, since it comes up in smaller shots.
Lifting ballpark

Pick the job that looks like yours.

We price by the foam the job takes, $4–$10 per sq ft on average with a $300 minimum. Add the size and how far it dropped for a closer number; your photos make it a firm price.

1.What sank?
sq ft of low concreteA driveway section is about 100 sq ft; a sidewalk panel about 20.
3.How far did it drop? (at the lowest edge)

Stand a tape measure at the low edge and read the gap to the slab next to it.

4.How did it sink?
Ballpark

Pick a job or enter a size and the range appears here.

What moves it: how far it dropped, how many sections, what the slab is sitting on, and how close we can park. The cost guide explains each.

Get the firm number

Leave your name and mobile. We text you within 24 hours, and three photos make it a firm price, no site visit for most jobs.

By sending, you agree we can text or call you about this request. No spam. Privacy

Have photos now? Use the full photo form and skip the back-and-forth.

Send a photo of the side of the porch
One from the side, one of the gap at the wall, and one of the post bases. Firm price by text or email within 24 hours.
Get My Price

After a porch lift: gutters, downspouts and the joint at the house

Level porch, sealed joints, and a few dime-sized gray patches where the foam went in. The patches are close to concrete color and fade into older slabs within a season. We text you before-and-after photos before we leave.

Keeping it level means keeping water out from under it. Three things do most of the work: keep the joints and cracks sealed, backfill soil against any slab edge the lift left exposed, and keep downspouts discharging away from the concrete. Sealing is its own line on your quote; the rest is in what to do after your concrete is lifted.

  • Check the gutter above the porch. Roof runoff landing on and around the slab is often what softened the soil under it. Water should go down the downspout, not over the gutter's edge.
  • Extend that downspout so it lets out several feet away from the porch and the foundation.
  • Keep the wall joint and the joints around the posts sealed, so rain stops running in behind the slab.

Sources

  1. Wisconsin Admin. Code SPS 321.16: frost protection for footings
Questions

Common questions

Can you lift a porch that has roof posts sitting on it?

Often, yes. We lift slowly from several holes so the slab, the posts and the beam rise together, and we watch the post bases the whole time. If a post has already been shimmed or the beam has pulled off a post, we tell you from the photos whether lifting fixes it or a carpenter needs to be involved first.

How do I know if my porch is hollow underneath?

Look at the side. A solid porch has a concrete face down to the ground. A hollow one usually has a block or brick wall with a vent, a small door or a crawlspace access, and older homes often have a cold cellar under the porch. Send a photo of the side and we'll tell you.

Can you lift the porch and the steps at the same time?

Yes. Steps are usually poured separately from the porch, so they settle separately. We lift both in one visit, the porch first so the steps can be set to meet it.

Will lifting the porch close the gap at the house?

If the slab tipped away from the wall, lifting the outer edge rotates it back and closes most of the gap, and the slab ends up pitched slightly away from the door so rain stops running at the foundation. What's left of the gap is sealed with flexible sealant so water stops running in behind the porch.

Can you lift a porch that's attached to the house without hurting the foundation?

Yes. The foam goes under the porch slab and pushes up on the slab, not on the wall. The house sits on footings at least 48 inches down, well below anything the foam reaches, and we keep the holes back from the foundation edge. We inject in short shots and watch the joint at the wall, so the slab comes up to meet the house instead of pressing into it.

How much does it cost to level a concrete porch in Green Bay?

A small porch or landing usually runs $300–$600, and our job minimum is $300. A larger porch of one or two slabs (about 150 square feet) usually runs $600–$1,500, and steps lifted in the same visit go on the same quote. Photos of the side, the gap at the wall and any post bases get you a firm price by text or email within 24 hours.

How long does it take to lift a porch?

Usually 1 to 3 hours on site. A porch carrying roof posts takes toward the longer end, since we lift in smaller shots and watch the post bases, and you can walk on the porch as soon as we pack up.

Is my porch roof sagging because the slab sank?

It can be. If the roof posts sit on the porch slab and the slab dropped, the posts and beam dropped with it, and lifting the slab brings them back up together. If the posts stand on their own footings or the slab is still level, the sag is in the framing, which is a carpenter's job, and a photo of each post base tells us which.

Can you lift a porch slab around brick or stone columns?

Usually. If a column stands on its own footing, it didn't sink, so we lift the slab up to meet it and seal the joint around its base. If the column sits on the slab and dropped with it, we lift slowly from holes around it so the column and the roof above rise evenly; send a close photo of where each column meets the slab.

Is it better to lift a covered porch or replace it?

If the slab is solid, lift it. Replacing a porch slab under a roof means shoring the posts, breaking out concrete against the house and pouring in a tight spot, and the new slab goes back on the same fill. Lifting usually takes an afternoon and never touches the roof, though a porch that's hollow underneath or broken into many pieces is the exception.

Can you lift a wraparound porch?

Yes. A wraparound porch is usually poured in several sections, and each one settles on its own, often most where a downspout empties beside it. We lift the low sections one at a time to a single line along the house, so the joints meet flush, then seal those joints along with the joint at the wall.

Can you lift a porch that has a cold cellar under it?

Not with foam. A porch over a cold cellar or crawlspace is a slab carried by the walls around it, and the space underneath is supposed to be there, so filling it isn't the fix. If that kind of porch is sagging or cracked, it needs a look at how the slab is supported, and we'll tell you that from the photos rather than quote a lift.

How do I get my porch ready for lifting?

Clear furniture, planters and anything heavy off the porch, and make sure we can run a hose from the driveway to it. Roof posts and railings stay where they are, but tell us if a railing is also fastened to the house wall, because the porch end will move and the house end won't. You don't need to be home.

Can you level a wooden porch?

No. Foam lifting is for poured concrete slabs on the ground, so a wood porch on posts, piers or a crawlspace is a job for a carpenter or deck builder. If the porch floor is a concrete slab and only the posts, steps or railings are wood, the slab can usually be lifted, and photos tell us which you have.

Why does water or ice collect on my porch landing?

Usually because the landing settled and tipped back toward the door, or dropped in one spot, so rain and roof drip sit there and freeze. Lifting it back to a slight fall away from the door lets water run off before it turns to ice. Check the gutter above it too, since roof runoff landing on the porch is often what softened the soil underneath.

Keep reading

Related

Concrete leveling · Steps & stoops
Steps & Stoop Leveling

Front stoop pulling away from the house or tipping? See when foam lifting can raise concrete steps and when they need replacing. Free photo quote.

Concrete leveling · Patios
Patio Leveling

Patio tipping toward the house or rocking underfoot? Foam lifting levels it and fills the voids underneath. Free photo quote, no sales call.

Protect the repair
Crack & Joint Caulking

Seal driveway joints, cracks and the gap at your foundation with flexible polyurethane sealant. Keeps water and salt out. Free photo quote.

Get your price from a few photos

Send three phone photos and a quick measurement. You'll get a firm price by text or email within 24 hours, no site visit needed for most jobs.

Get My PriceCall (920) 655-2193