Two jobs make up most of our work, so they come first: lifting sunken concrete and coating floors. Caulking, sealing and cleaning are add-ons, priced further down. Send photos and you'll get a firm price by text or email within 24 hours.
Concrete leveling cost
The cost of lifting a slab is set by how far down it has sunk, the actual void under it, and the size of the slab. We charge by the material the job takes, and on average that comes to $4–$10 per square foot. Every project is unique, so yours is priced from your photos.
Your quote is a firm price for the job. The rare exception is a much bigger void under the slab than expected; if we ever find one, we stop and talk it over with you before going any further.
Every job has a $300 minimum. As examples, per section that's $300–$600 for one sidewalk panel and $400–$1,000 for one driveway section of about 100 square feet, and these are the ranges common jobs fall in:
| Lifting job | Our price |
|---|---|
| Single sidewalk panel, AC pad or small stoop | $300–$600 |
| Front walk, 3–5 panels (50–125 sq ft) | $300–$1,250 |
| Garage apron, approach or one driveway section (about 100 sq ft) | $400–$1,000 |
| Patio, 1–2 slabs (about 150 sq ft) | $600–$1,500 |
| 2–3 driveway sections (200–300 sq ft) | $800–$3,000 |
| Several areas in one visit (300–400 sq ft) | $1,200–$4,000 |
| Mid-size and larger jobs | About $4–$10 per sq ft |
What moves a job inside its range: how far the slab dropped, the void under it, slab size and thickness, how many sections, access, and cracks. The full breakdown, with what's included and lift vs. replace, is on concrete leveling cost in Green Bay, and the concrete leveling cost calculator shows a range for your job in about 30 seconds.
What these lifting jobs look like
Two example lifts, before and after, to show the kind of job the rows above cover: a single sidewalk panel with a trip lip, and driveway sections that settled out of line. They're example photos, not our jobs, and neither one is a priced job. Your price comes from photos of your own slab.
Example lifts. Photos from our own local jobs get added as we finish them.
Polyurea flake floor coating cost
A polyurea flake floor is $6–$9 per square foot installed, with a $2,000 minimum. Patios, porches and pool decks get the outdoor topcoat at $7–$10 per square foot.
| Floor | Our price |
|---|---|
| One-car garage, 12 × 24 (288 sq ft) | $2,000–$2,592 |
| Two-car garage, 20 × 20 (400 sq ft) | $2,400–$3,600 |
| Two-car garage, 24 × 24 (576 sq ft) | $3,456–$5,184 |
| Three-car garage, 24 × 36 (864 sq ft) | $5,184–$7,776 |
Prices by garage size, what's included and what changes the number are on garage floor coating cost.
Floor coating price calculator
Slide to your floor size, or tap a garage size, and see what a polyurea flake floor costs.
Drag the slider. See your number.
Pick your floor and set its size for an installed price from our published rates.
$6–$9 per sq ft · installed · Polyurea base coat, full flake, polyaspartic UV topcoat
About garage floor coatings →Get a real number
Leave your name and mobile number and we'll text you about your floor within 24 hours.
Add-on services: caulking, sealing and cleaning
Most people add these to a lift or book them together. Each is priced on its own line of your quote.
| Add-on | Our price |
|---|---|
| Joint and crack caulking | $5–$10 per linear foot; $275 minimum on its own, no minimum added to a lift |
| Concrete sealing (penetrating sealer) | $0.40–$0.90 per sq ft; driveway, walks and patio together usually $640–$1,000+ |
| Concrete cleaning (pressure washing) | $0.60 per sq ft ($0.55 past 1,000), $350 minimum; $50 off with caulking or a lift |
Cleaning price calculator
Add up the areas you want pressure washed and see what the cleaning costs, with sealing as an option.
Add each area you want cleaned on the same visit, in feet. $0.60 per sq ft ($0.55 past 1,000), $350 minimum; stain pre-treatment included.
576 sq ft × $0.60 = $346, so the $350 minimum applies
The $350 minimum covers up to about 583 sq ft: room for 7 sq ft more at this price.
Booking caulking or a lift too? It's $50 less.
An estimate from your measurements, not a quote. Stain pre-treatment, edges, rinse and runoff control are included. Your firm price comes from photos, by text within 24 hours.
Get my exact price →Pick a price guide
Our lifting price sheet by job, the per-square-foot rule of thumb, the minimum, and lift vs. replace.
Pick your job or enter the square feet and see our range in 30 seconds.
Local examples job by job, timing, and lift vs. replace.
Our price by garage size, plus what's included.
Foam vs. mudjacking vs. replacement, side by side.
The nine things that move a lifting price.
Cracks, sunken slabs, resurfacing and replacement.
Measure your joints, then price the job.
Price per square foot and per year of protection.
Hire it, rent it or buy it: real numbers.
National price ranges
| Service | National range |
|---|---|
| Concrete leveling, typical job | $661–$1,883 (average $1,241) |
| Foam lifting (polyjacking) | $5–25 per sq ft |
| Mudjacking | $3–6 per sq ft |
| Garage floor coating, polyaspartic | $5–12 per sq ft installed |
| Garage floor coating, epoxy | $4–10 per sq ft installed |
How we quote
- 1You send photosA wide shot, a close-up with a tape measure showing the drop, and a shot along the slab. Here's how to take them.
- 2We price the jobYou get a firm price by text or email within 24 hours, with what's included spelled out.
- 3Approve and bookApprove the quote, pick a date, and that's it. A site visit only happens if the photos can't answer something.
Ways to save
- Bundle sections. Fixed costs are the same for one section or ten, so lifting everything at once costs less per section.
- Team up with neighbors. If a neighbor needs work too, we can do both in one trip and pass the travel savings on.
- Be flexible on timing. Jobs that fit around our route can sometimes be priced lower.



