Skip to content
(920) 655-2193|Serving Green Bay & Northeast Wisconsin
Rise & Grind Concrete
Get My Price
Pricing · Garage floor coatings

Garage Floor Coating Cost in Green Bay

The short answer

Our polyurea flake floors are $6–$9 per square foot installed, with a $2,000 minimum: about $2,000–$2,592 for a 288-square-foot one-car garage, $3,456–$5,184 for a 576-square-foot two-car and $5,184–$7,776 for an 864-square-foot three-car. That includes diamond grinding, crack repair, base coat, flake and topcoat; heavy repair or grinding off an old coating adds to it. Nationally, professional coatings run about $4 to $12 per square foot.

By Rob Diederich, owner · Updated
Our price
$6–$9 per sq ft
Minimum
$2,000
Two-car (576 sq ft)
$3,456–$5,184
Install
Usually 1 day

This page prices our garage floor coating: a polyurea base coat, a full broadcast of color flake and a clear polyaspartic topcoat over diamond-ground concrete. There is one rate, $6–$9 per square foot installed, and one minimum, $2,000. Below: what that comes to for your garage, what the price covers, what adds to it, and how it compares with an epoxy floor and with a kit from the hardware store.

Garage floor coating price by garage size

GarageFloor areaOur installed price
One-car garage, 12 × 24288 sq ft$2,000–$2,592
Two-car garage, 20 × 20400 sq ft$2,400–$3,600
Two-car garage, 24 × 24576 sq ft$3,456–$5,184
Three-car garage, 24 × 36864 sq ft$5,184–$7,776
Four-car garage1,152 sq ft$6,912–$10,368
Floor area times $6–$9 per square foot, never under the $2,000 minimum. Grinding, crack repair, base coat, flake and topcoat are in the price.

The math is the floor area times the rate. To get your area, measure wall to wall at the floor and multiply length by width. Where a floor lands between the low and the high end of its range depends on the shape the concrete is in and the finish you pick. Your photos settle that, and the number you get back is a firm price for the job.

Example jobTypical price
One-car garage, 12 × 24 (288 sq ft)$2,000–$2,592
Two-car garage, 20 × 20 (400 sq ft)$2,400–$3,600
Two-car garage, 24 × 24 (576 sq ft)$3,456–$5,184
Three-car garage, 24 × 36 (864 sq ft)$5,184–$7,776

$6–$9 per sq ft, $2,000 minimum. Full flake on sound concrete; heavy crack repair or grinding off an old coating is extra. Your photos set the final price.

Floor coating price calculator

Drag the slider. See your number.

Pick your floor and set its size for an installed price from our published rates.

1.Pick your floor
100 sq ft3,000 sq ft
Ballpark estimate
$3,456 – $5,184

$6–$9 per sq ft · installed · Polyurea base coat, full flake, polyaspartic UV topcoat

About garage floor coatings →

Get a real number

Leave your name and mobile number and we'll text you about your floor within 24 hours.

Your quote: Garage floor · 576 sq ft · $3,456–$5,184 ballpark

By sending, you agree we can text or call you about this request. No spam. Privacy

Want it firm? Add photos on the full photo form.

Basement, shop, patio and commercial floor prices

The same system goes on other floors. Indoor floors share the garage rate; patios, porches and pool decks get the UV-stable outdoor topcoat with grit, at $7–$10 per square foot. Every floor has the same $2,000 minimum.

FloorOur priceWhat's different
Garage floor$6–$9 per sq ftPolyurea base coat, full flake, polyaspartic UV topcoat
Basement floor$6–$9 per sq ftMoisture-tested first, then flake or solid color
Shop / pole barn$6–$9 per sq ftFlake or solid color, with grit where it gets wet
Patio & porch$7–$10 per sq ftUV-stable outdoor topcoat with grit for wet feet
Commercial$6–$9 per sq ftBack in use within hours, scheduled around you

What moves a garage floor coating price

Most floors come in at the posted rate. These six things are what move a price inside the range, or add a line to the quote:

FactorWhy it matters
Square footageThe main driver. A one-car garage is about 288 sq ft (12×24), a two-car 400–576 (20×20 to 24×24), a three-car about 864 (24×36).
Floor conditionHeavy cracking, pitting or spalling takes more repair before coating.
Old coating or sealerHas to be ground off completely first.
MoistureSlabs with moisture coming through may need a moisture-tolerant base coat.
System and finishFlake size, full vs. partial broadcast and topcoat choice.
Sunken sectionsLifting first, when a section has settled, is quoted separately.

Small floors land at the minimum. Every floor gets the same setup and the same steps, so a floor under about 223 square feet is $2,000 whatever its size. A one-car garage of about 288 square feet is already at or above it, at $2,000–$2,592.

National prices by garage size

GarageSizeNational cost
One-car (12×24)288 sq ft$1,200–3,500
Two-car (20×20)400 sq ft$1,600–4,800
Two-car (24×24)576 sq ft$2,300–6,900
Three-car (24×36)864 sq ft$3,500–10,400
From HomeGuide. By type: epoxy about $4–10 per sq ft, polyurea $5–10, polyaspartic $5–12. National averages, not our prices.

Read the national table as context. The table at the top of this page is what we charge here.

What's included in the price

  • Full diamond grinding with dust extraction.
  • Crack, joint and pit repair.
  • Base coat, full flake broadcast and clear topcoat.
  • Moving it all out of your way is on you; we can quote it if you'd rather not.

On install day that's six steps, in this order:

  1. 1Diamond grindingThe whole floor, edges included, is ground to about CSP 2–3 with dust extraction. No acid etching.
  2. 2Crack and joint repairCracks, pits and spalls are filled and ground flush, so the coating goes down over sound concrete.
  3. 3Polyurea base coatThe layer that bonds into the ground concrete and holds everything else on.
  4. 4Full flake broadcastVinyl color flake is thrown into the wet base coat until it won't hold any more, then the loose flake is cleared off.
  5. 5Polyaspartic topcoatA clear, UV-stable topcoat locks the flake in, sets the grip and takes the wear.
  6. 6Walk-through and written warrantyWe walk the floor with you. The warranty terms are on your quote from the start.

Every coating comes with a written warranty, spelled out on your quote before you approve it. The install itself is covered step by step on the garage floor coatings page.

What costs extra

The rate covers sound concrete. Four things are priced on top, and each one is on your quote before you decide:

  • Heavy repair. Deep cracks, spalling or pitting beyond ordinary crack and pit filling.
  • An old coating, paint or sealer. It has to be ground off completely first, because a new coating is only as strong as what's under it.
  • A moisture-tolerant base coat, when moisture is coming up through the slab.
  • Emptying the garage, if you'd rather we move everything off the floor.

Sunken garage floor or apron: lifting is priced on its own line

A coating follows the slab, so it can't level a floor. If a section of the floor or the apron at the door has settled, we lift it with foam first, and the lift is its own line on the same quote. Lifting runs $4–$10 per square foot on average with a $300 minimum, and a garage apron of about 100 square feet runs $400–$1,000. The injection holes are patched and ground flush during coating prep, so the coating covers them. Planning both together saves a trip. More on garage floor leveling and concrete leveling cost.

What a cheaper garage floor coating quote leaves out

When another quote comes in lower, it usually leaves out one of the steps above. These are the common shortcuts:

  • Acid etching or a quick wash instead of diamond grinding the whole floor.
  • No crack repair, so the coating goes over open cracks and pits.
  • One thin coat instead of a real base coat.
  • A light sprinkle of flake instead of full coverage.
  • A clear coat that isn't UV stable, which yellows.

To compare two quotes fairly, ask each bidder the same three things: do you grind the whole floor, edges included; what goes down, in what order; and what does the written warranty cover. Those shortcuts are the usual reasons garage floor coatings peel.

Why pro coatings cost more than a kit

Most of the cost is in the prep and the material thickness, which are exactly the things that make a coating last. Why garage floor coatings peel explains the difference.

DIY epoxy kitOur polyurea flake floor
PrepAcid etch, which leaves roughly CSP 1–2 and doesn't remove oil or old sealerFull diamond grind to about CSP 2–3, with dust extraction
Crack repairUp to youCracks, joints and pits filled and ground flush
What goes downA thin, water-based epoxy filmPolyurea base coat, flake, polyaspartic topcoat; polyaspartic coats go on about 6–12 mils dry per coat
FlakeA light sprinkle from a packetFull broadcast, so no base color shows
Hot tiresCan lift a thin filmA bonded, layered floor resists hot-tire pickup
SunlightMost epoxies yellowThe topcoat is UV stable and stays clear
Who does the workYouWe do, usually in one day for a one- or two-car garage
Surface profiles on the ICRI CSP scale; film thickness from the ArmorGarage polyaspartic data sheet.

A kit can look good for a while, and it costs far less up front. In a garage that sees road salt and hot tires, a thin film on lightly etched concrete doesn't have much to hold on to, and when it peels, it has to be ground off before anything else can go down.

Polyurea vs. epoxy garage floor cost

If you've been pricing an epoxy garage floor, the gap is smaller than most people expect. National cost guides (HomeGuide) put installed epoxy at about $4 to $10 per square foot, polyurea at about $5 to $10 and polyaspartic at about $5 to $12. Ours is $6–$9 with the prep included. We don't install epoxy, so here is what the difference buys:

  • Your garage back sooner. Walk on it within a few hours and park after about 24 to 48 hours. An epoxy-only floor can need up to a week.
  • A topcoat that stays clear. Polyaspartic is UV stable; most epoxies yellow by a sunny door.
  • Better resistance to hot tires, from a tougher, more flexible coating bonded into ground concrete.
  • One day of work in most garages, where an epoxy floor is often a two- or three-day install.

The full comparison, including where epoxy still makes sense, is in epoxy vs. polyaspartic garage floors.

How long a coated floor lasts

Cost guides cite 10 to 20 years or more for a professionally installed polyaspartic floor in a home garage. Where a floor lands in that range comes down to how well it bonded, how thick the system is, how hard the floor gets used and how it's cared for. That's why the price is mostly prep: the grinding and the repairs are what the rest of the floor depends on.

How a garage floor coating quote works

  1. 1Tell us about the floorThe photo estimate form asks what kind of floor it is, its size (length and width, or square feet) and what shape it's in: bare concrete in decent shape; cracks, pits or salt damage; or an old coating or paint.
  2. 2Send three photosWhole floor: from the doorway, with the walls and the door in the shot. Up close: cracks, pits, salt damage or peeling, with a coin or tape for scale. Edges and steps: where the floor meets the walls, steps, a drain or the apron.
  3. 3Get a firm priceBy text or email within 24 hours, with anything extra, like heavy repair or an old coating to grind off, priced on the quote before you decide.
  4. 4A visit only if we need oneMost floors are priced from photos. If something can't be judged from them, we come look first, and we bring real flake samples.
  5. 5Pick a dateMost one- and two-car garages are coated in a day. You can walk on the floor within a few hours and park after about 24 to 48 hours.
Price your garage floor
Send the floor size and three photos. You'll get a firm price by text or email within 24 hours.
Get My Price

Sources

  1. HomeGuide: garage floor coating cost
  2. HomeGuide: polyaspartic floor coating cost
  3. CS Unitec: concrete surface profiles (ICRI CSP) and prep equipment
  4. ArmorGarage Polyaspartic 80 technical data sheet
Questions

Common questions

How much does it cost to coat a two-car garage?

With us, about $2,400–$3,600 for a 400-square-foot two-car garage and $3,456–$5,184 for a larger 576-square-foot one, at $6–$9 per square foot. Nationally it's about $1,600 to $4,800 and $2,300 to $6,900 (HomeGuide). Send a photo of the floor and its size for a firm price by text or email, usually within 24 hours.

Is there a minimum for a floor coating?

Yes, $2,000. It covers the setup, grinding and dust extraction that every floor needs, so a small floor still gets the full system. A one-car garage of about 288 square feet already runs $2,000–$2,592.

Why are professional garage floor coatings more expensive than DIY kits?

Diamond grinding, crack repair and a thicker multi-layer system cost more than an etch-and-roll kit. Those are exactly what keep a coating from peeling under hot tires and road salt.

Does the price include moving everything out of the garage?

The floor has to be completely empty. Most people move their own things; if you'd rather we handle it, ask and we'll quote it.

How many square feet is a garage?

A one-car garage is usually about 288 square feet (12 by 24 feet), a two-car 400 to 576 (20 by 20 up to 24 by 24), and a three-car about 864 (24 by 36). Measure wall to wall at the floor and multiply length by width.

Does full flake cost more than partial flake or solid color?

No. All three finishes are in the same $6–$9 per square foot range with the same $2,000 minimum, because the grinding, the repairs, the base coat and the topcoat are the same. Only the amount of flake changes. We can price more than one finish from the same photos so you can compare.

What does it cost to grind off an old garage floor coating first?

It's priced on top of the per-square-foot rate, and the number is on your quote before you decide. Paint, old epoxy and sealers have to be ground off completely, because a new coating is only as strong as what's under it. Send a close-up of the old coating, especially anywhere it's peeling, with your other photos.

Is a garage floor coating priced by the square foot or by the garage?

By the square foot: $6–$9 installed, never under the $2,000 minimum. The one-, two- and three-car prices on this page are that rate times a typical floor area, so a garage that's bigger or smaller than those sizes is priced on its own measurements.

Keep reading

Related

Polyurea flake floors · Green Bay & NE Wisconsin
Garage Floor Coatings

Garage floor coatings in Green Bay, $6–$9 per sq ft: polyurea base, polyaspartic UV topcoat. Looking for epoxy flooring? See what we install instead.

Coatings · Comparison
Epoxy vs. Polyaspartic

Epoxy vs. polyaspartic and polyurea garage floors: cure time, UV yellowing, hot tires, cold, road salt, cost and lifespan, and when epoxy still fits.

Pricing · Concrete leveling
Concrete Leveling Cost

Concrete leveling cost in Green Bay: our foam lifting prices by job, from a $300 minimum, next to national averages, and what moves the price.

Get your price from a few photos

Send three phone photos and a quick measurement. You'll get a firm price by text or email within 24 hours, no site visit needed for most jobs.

Get My PriceCall (920) 655-2193