Commercial floor coating at a glance
Where a coated floor earns its keep
A bright, even floor that shows off what's on it and cleans up with a mop.
Spills wipe up, and there's no carpet or tile grout to stain.
Oil, salt and grit stay on top of the concrete.
Flake texture or grit for grip where snowmelt comes in.
Heavy industrial floors are a different job. Constant forklift traffic, food processing and harsh chemicals call for specialty systems. Send photos and we'll tell you honestly whether yours is a fit.
Which finish for which commercial space
| Space | Finish that fits | Why |
|---|---|---|
| Showrooms and offices | Partial flake | A cleaner, calmer look for rooms that stay fairly clean |
| Entryways | Full flake, with grit | Hides tracked-in dirt and salt, and grips where snowmelt comes in |
| Service bays and shops | Full flake or solid color | Flake hides tire marks and wear; solid color makes a leak or a dropped part easy to spot |
| Back rooms, storage and mechanical rooms | Solid color | A uniform floor that's easy to keep clean |
| Restrooms | Any finish, with grit in the topcoat | Restroom floors get wet |
Downtime is the real cost
Epoxy floors can need several days and up to a week before vehicles go back on them. Polyaspartic cures much faster: walkable within hours and ready for vehicles in about 24 to 48 hours. Most smaller spaces are done in a day, so the work can be planned for a closed day or a weekend.
Who it's for, and who it isn't
A polyaspartic floor suits foot traffic, carts and vehicles on rubber tires: showrooms, retail floors, offices, break rooms, restrooms, entryways, service bays and back rooms. It's the same system we put in garages, so a car, boat or powersports showroom can drive on it. Constant forklift traffic, food processing and harsh chemicals call for specialty industrial systems, which we don't install. Tell us how the floor is used and we'll say whether it's a fit.
Prep is the same as a garage, done at scale
Every commercial floor gets a full diamond grind with dust extraction, repairs to cracks and joints, and a moisture check where the slab is on grade. Old coatings and sealers come off completely. Sections that settled, like a sunken slab at an overhead door, get lifted first.
What changes in a business is everything around the floor:
- Bare concrete first. The coating goes on concrete, so carpet, tile and anything else on the slab comes up first.
- Clearing the area. Each area has to be cleared of shelving and fixtures. Merchandise and equipment near the work should be covered or moved.
- Dust and noise. The grinders run with dust extraction vacuums that capture most of the dust as we go. They're loud, which is one more reason most businesses book a closed day.
- Working in sections. On a larger floor we can split the work at doorways or other clean lines and close one area at a time. The coating smell carries, so we plan ventilation for the side that stays open.
- Grip where it gets wet. Entries, restrooms and anywhere the floor gets wet get flake texture and grit in the topcoat. The ADA standards require floors on accessible routes to be stable, firm and slip resistant, without setting a test number.
- Edges and doorways. Each coat goes on at about 6 to 12 mils, thousandths of an inch, so the finished floor leaves no lip at a doorway. Where it stops at carpet or tile, we finish it to a clean, straight edge.
How we coat a commercial floor
3D renders, not a job video; the tools are shown without the crew. Most garages are done in a day; parking time depends on the system.
Planning the closure
Most smaller spaces are coated in a day, and people can walk on the floor within a few hours. After a Sunday or holiday install you can usually open on schedule the next morning. Areas where vehicles park or drive need about 24 to 48 hours, so a showroom is better planned for a closed day or weekend with the inventory moved out.
What it costs
Commercial floors are $6–$9 per square foot installed, with a $2,000 minimum. A 1,000-square-foot showroom or shop floor runs $6,000–$9,000, and a 2,500-square-foot floor runs $15,000–$22,500. A single restroom or break room comes in at the minimum, because the setup and the steps don't shrink with the room. That covers diamond grinding, crack repair, the base coat, the flake or color and the topcoat on sound concrete. Where your floor lands depends on the square footage, crack and joint repair, any old coating to remove and the finish. Nationally, professional floor coatings run about $4 to $12 per square foot installed (HomeGuide).
Upkeep
The clear topcoat is the wear layer, so there's no wax to strip and reapply. Daily dust mopping does most of the work, since tracked-in grit is what wears a topcoat, and an auto scrubber with a soft pad and a pH-neutral cleaner is fine. If the traffic lanes dull after years of use, the topcoat can be scuffed and recoated without grinding the whole floor again.
What to send for a quote
The photo estimate form asks what kind of floor it is, its size (length and width, or square feet) and what shape it's in: bare concrete in decent shape; cracks, pits or salt damage; or an old coating or paint. Then it asks for three photos:
- Whole floor. From the doorway, with the walls and the door in the shot.
- Up close. Cracks, pits, salt damage or peeling, with a coin or tape for scale.
- Edges and steps. Where the floor meets the walls, steps, a drain or the apron.
- For a business: rough dimensions of each area, how the floor is used (foot traffic, carts or vehicles), what's on the slab now, and your hours and closed days.
You'll get a firm price by text or email within 24 hours, with anything extra, like heavy repair or an old coating to grind off, priced on the quote before you decide. More questions, including restrooms, showrooms, auto scrubbers, doorways and the warranty, are answered in the floor coating FAQ.