Skip to content
(920) 655-2193|Serving Green Bay & Northeast Wisconsin
Rise & Grind Concrete
Get My Price
Learn · Commercial

Concrete Parking Lot Repair: What a Small Crew Can Fix and What Needs a Big Firm

3D render of a level front walk with sealed joints
The short answer

For a settled concrete panel in a parking area, drive lane, dock apron, lot-side sidewalk, or around a catch basin, foam lifting is usually the fastest and least disruptive fix, as long as the concrete is still in one piece. Broken or crumbling panels need replacement, and dips in asphalt need an asphalt contractor.

By Rob Diederich, owner · Updated
Businesses, HOAs & buildersBy , ownerPublished Updated 9 min readSinking & voidsJoints & caulkingSealersParking lots
In this article (10 sections)

Parking lots take a beating in northeast Wisconsin. Garbage trucks, delivery vans, plow trucks scraping at 5 a.m., salt brine all winter, and snow piles that sit in the corner until April.

The concrete parts of a lot usually fail in the same spots: the panel next to the catch basin, the dock apron, the walk along the curb. And parking lot concrete repair usually doesn't have to mean a tear-out.

Here's an honest look at what a small lifting crew can fix, what belongs with a bigger outfit, and how to keep your concrete from sinking again.

What We Take On, and What We Don't

We're a small, owner-operated crew. That's a good fit for most concrete trouble spots on a business, church, apartment, or HOA lot, and it's what our commercial concrete lifting service is built around. It isn't a fit for everything.

Good fit for a small lifting crewSpecialty work for larger firms
Sunken concrete parking panels and drive-lane slabsHighways, interstates, and state roads
Loading dock apronsAirport runways and taxiways
Sidewalks along the lot and at entrancesLarge municipal street paving
Curb transitions and ramp landings that settledNew lots or full lot reconstruction
Concrete around catch basins and storm drainsRebuilding catch basin structures or storm lines
Dumpster pads and drive-thru lanesAsphalt patching, milling, and overlays
Joint sealing, cleaning, and sealing concreteAsphalt sealcoating and lot-wide striping

Right-hand column work needs paving crews, traffic control, and heavy equipment. We'll tell you that from your photos instead of taking a job we can't do right.

Why Lot Concrete Settles Around Here

  • Heavy loads in the same spots. Lots are mostly built for cars, but garbage trucks, delivery trucks, and plow trucks hit the same dumpster enclosures, dock approaches, and entry drives every week. That's often where settling starts.
  • Plowing. Blades chip any raised edge and scrape out joint sealant that sits too high. Plow piles stacked in the same corner add weight, then feed meltwater into the same joints all spring.
  • Salt. Salt doesn't sink slabs by itself, but brine runs into open joints and cracks, freeze-thaw with salt is hard on concrete surfaces, and water that gets under a slab carries fine soil away.
  • Frost. Wet soil under a slab freezes, lifts it, then thaws and leaves it sitting over a soft spot. A little worse each winter.
  • Catch basin drainage. The concrete around a basin sits on backfill placed around the structure, and all the runoff in that part of the lot flows right at it.
  • Clay underneath. Heavy red clay subsoil is common across Brown County. It drains slowly, so water under a slab keeps the soil soft.

Problem, Cause, Fix

What you seeWhy it happensFix
Concrete dished down around a catch basinBackfill around the basin settles. Runoff washes soil through gaps in the structure.Lift the panels if the basin is sound. Repair the basin first if it isn't.
Lip where the lot-side walk meets a curb or rampWalk panel settled on loose fill or washed out at the edgeLift the low side, then caulk the joint
Dock apron ponding at the dock wallTruck loads plus water collecting near the dock soften the soilLift the apron, then seal the joint at the wall
Panel that rocks, thumps, or holds waterVoid under the slab from washout or frost, or the panel lost its pitchLift it, filling the void with foam as it rises
Corners breaking off along a jointEdges cracking under wheel loads after losing supportLift if mostly intact. Replace badly broken panels.
Open joints full of weeds, sand, or dead caulkSealant wore out, got plowed out, or was never installedClean out and reseal with flexible joint sealant
Flaking or scaling surfaceFreeze-thaw and salt damage at the surfaceNot a lifting job. Seal sound concrete to slow it. Resurface or replace severe areas.

Catch Basins: The Special Case

Concrete around catch basins sinks more often than anywhere else in a lot. The backfill around the structure is hard to compact well, the soil next to it sees more water than anywhere else on the property, and when the joints in the basin's rings or the mortar around the frame break down, water flows through those gaps and drags soil in with it. That leaves a hollow under the concrete.

So before anyone lifts around a basin, look at the basin. A flashlight through the grate tells you a lot.

If the basin looks like thisDo this
Walls and rings intact, frame tight to the concreteLift the surrounding panels, then seal the joint around the frame
Cracked or shifted rings, missing mortar, soil piled insideGet the structure repaired first. Lifting over a leaking basin only buys time.
Frame and grate sunk below the concrete around themThe casting needs to be reset by a concrete or utility contractor

Foam follows open gaps and pipes, so we plan the hole pattern around the structure and keep an eye on the inside of the basin while we lift.

Lift, Replace, or Patch?

Plenty of lots around Green Bay mix an asphalt parking field with concrete aprons, pads, and walks. Each material gets its own fix.

OptionWorks onGood forWatch out for
Foam liftingConcretePanels that settled but are in one piece. Voids. Ponding from lost pitch.Can't lower a heaved panel. Doesn't repair broken or scaled concrete.
Panel replacementConcreteShattered, crumbling, or badly heaved panels. Panels that keep cracking under truck loads.The most cost and disruption, plus curing days. A new panel on the same wet base can settle again.
Asphalt patching or overlayAsphaltPotholes, alligator cracking, dips in the paved fieldA different trade. The seam where asphalt meets concrete lets water in, so ask how it'll be sealed.

The rule of thumb: if a concrete panel is in one piece and just dropped, lifting costs about half of replacement on average and you're parking on it the same day. If it's in pieces, replace it. If it's black, call an asphalt contractor. For more on lifting versus tearing out, see foam concrete lifting pros and cons.

Seal the Joints Before Winter

Joints in a concrete lot are there on purpose: they control where the slab cracks. They're also where water, salt brine, and sand get in.

  • Clean, dry, and warm enough. Joints have to be cleaned out, dry, frost-free, and about 40°F or warmer for sealant to bond.
  • Flexible sealant, not patch. We use a self-leveling polyurethane joint sealant on flat lot joints, with closed-cell backer rod where the joint is deep. Rigid fillers crack and pop out.
  • Below the surface. A bead that sits proud is the first thing a plow blade peels out.
  • Coned off. Traffic stays off fresh sealant as long as its label says.
  • Late summer to early fall. After any lifting, before the first hard freeze. Then walk the joints each spring once the snow piles melt.

More on sealant types and backer rod: best concrete crack caulk.

How a joint gets sealed
W≈ W/21234
  1. Cleaned out and dryOld caulk, rotted filler, dirt and weeds come out, and the joint faces are wire-brushed and vacuumed.
  2. Backer rod pressed inClosed-cell foam rod a bit larger than the gap, so it stays put. It sets the depth.
  3. Self-leveling sealantFlexible polyurethane, filled from the rod up to about half as deep as the joint is wide (W/2), the top slightly below the surface.
  4. Water shedsRain and snowmelt run across the joint instead of underneath, where they wash the base out.
A driveway joint in cross-section. The sealant bonds to the two slab edges only, so it can stretch through freeze-thaw. Illustration, not to scale.

Cleaning and Sealing Lot Concrete

Walks, aprons, and drive-thru lanes collect oil drips, rust stains, and mildew in shady corners. Pressure washing takes them off, but too much pressure or the wrong tip etches stripes into the concrete. A rotary surface cleaner gives a more even result than a wand alone.

A parking lot is built to send everything to its catch basins, wash water included. Storm drains generally carry water toward local streams and the bay, not a treatment plant, and many Wisconsin communities prohibit putting anything but stormwater in them. Whoever cleans your lot should have a plan for protecting the inlets when cleaners are involved.

Once the concrete is clean and dry, a penetrating silane or siloxane sealer cuts down how much water and salt brine it soaks up, without leaving a coating for tires and plows to wear off. New concrete has to cure first; product labels range from about a week to a month.

On a combined job, the order is: clean, let it dry, lift, patch the holes, caulk the joints, then seal once the caulk has cured.

What a sealer changes
UnsealedWater soaks in, freezes and flakes the topWater and salt brine soak into the surface, freeze, and pop it off in flakes.
SealedWater beads up and runs offA penetrating sealer goes into the concrete instead of sitting on top, so water and salt brine bead up and run off.Sealer, soaked into the top of the concrete
The top inch of a driveway slab in cross-section, unsealed and sealed. Illustration, not to scale.

Accessible Parking and Routes

The 2010 ADA Standards don't allow changes in level in accessible parking spaces or access aisles other than slopes no steeper than 1:48, about 1/4" per foot. A settled panel in an access aisle can push it past that, and a dropped walk on the route to your door can leave a lip over the 1/4" limit. Lifting can often bring both back in line. Our ADA sidewalk requirements guide has the numbers and how to measure them.

Keeping the Lot Open

We work in sections, with cones around the slabs we're lifting, and the rest of the lot stays open. Lifted concrete takes foot traffic right away and cars the same day. Off-hours starts can be arranged for drive-thrus, docks, or entrances that can't be blocked.

Quick Self-Check After the Next Rain

Walk the lot an hour after a good rain, and look for:

  • Puddles on concrete, a sign a panel lost its pitch
  • A sunken ring around a catch basin, or a gap at the frame
  • Panels that rock or thump under a car
  • Wide joints, weeds, or sand washing out
  • Lips over about 1/4" on walks to the door

Photograph each spot with a tape measure in the frame, and your quote request is mostly done.

Questions

Common questions

Can you lift a panel that has a catch basin in it?

Often, yes, if the basin itself is sound. If the structure is cracked, leaking, or the frame has dropped, that has to be repaired first, or the concrete will sink again.

Will lifted panels hold up to garbage trucks and plow trucks?

The foam fills the voids and supports the slab, and the slab carries the traffic as it was built to. What foam can't do is make a cracked or thin panel stronger, so truck-lane panels that are broken through are usually replacement candidates.

Do you work on asphalt lots?

Not on the asphalt. We handle the concrete in a mixed lot (aprons, pads, walks, and drive lanes) and refer asphalt work to a paving contractor.

Is a cracked panel still worth lifting?

A panel cracked into a couple of large, solid pieces often lifts fine. One broken into lots of small chunks, or crumbling at the surface, is better off replaced.

When is the best time to fix lot concrete?

Lifting runs from spring thaw to freeze-up. Joint sealing needs about 40°F or warmer and dry, frost-free joints. Late summer and early fall let you do both before the plows come out.

Keep reading

Related

Businesses · HOAs · Property managers
Commercial & HOA

Trip hazards, sunken entrances and settled walks in Green Bay fixed with foam lifting and joint sealing, scheduled around your hours. Send photos for a quote.

Learn · Commercial
Commercial Concrete Lifting

Sunken storefront walk, dock apron, or shop floor in Green Bay? How foam lifting fixes it with little downtime, when it won't, and what to send for a quote.

Learn · Commercial
ADA Sidewalk Requirements

ADA sidewalk rules in plain English: 1/4-inch lips, 1:48 cross slope, 36-inch width, 1/2-inch gaps, and the sunken-panel problems Green Bay properties can fix.

Send Us Your Lot Photos. No Sales Call.

Send a wide shot of each trouble spot, a close-up of the worst edge or the concrete around the catch basin with a tape measure in the frame, and a rough size of each area. We'll tell you what's a lifting job, what needs a different contractor, and what our part costs.

Get My PriceCall (920) 655-2193

Or see what we do for businesses, HOAs, and property managers →.