Skip to content
(920) 655-2193|Serving Green Bay & Northeast Wisconsin
Rise & Grind Concrete
Get My Price
Oconto County · Polyurea flake floors

Garage Floor Coatings in Abrams, WI

From attached garages on newer homes to pole buildings out back, we coat floors across the Town of Abrams with a polyurea base coat, full flake broadcast and a polyaspartic topcoat.

The short answer

Yes, we coat garage floors in Abrams with a polyurea flake system, the upgrade most people mean when they ask for an epoxy floor. The concrete is diamond ground and repaired, then gets a polyurea base coat, a full broadcast of flake and a clear, UV-stable polyaspartic topcoat. It's $6–$9 per square foot installed, so a 24 × 24 two-car garage runs $3,456–$5,184. Most one- and two-car garages are done in a day, and you can park after 24 to 48 hours.

By Rob Diederich, owner · Updated
Prep
Diamond grind, CSP 2–3
Install
Usually 1 day
Park on it
24–48 hours
Price
$6–$9 per sq ft

Garage floors in Abrams

The garage is the front door

Abrams describes itself as a quiet bedroom community, and for a household that commutes, the garage is the door everyone uses. All winter that means brine and slush on the floor twice a day. On a coated floor it sits on top and squeegees out the door instead of soaking into the concrete.

New pole building floors

New pole buildings go up in Abrams year after year, and whatever parks inside, from a pickup to a tractor, drips on the floor. Rubber tires are fine on a coated floor, and fluids wipe off instead of soaking in. Steel tracks, chains and buckets dragged across it can gouge any coating, so tell us what drives in there.

Garage and shop on one trip

Abrams is farther north than most of our jobs, so if you have a garage and a shop to coat, it makes sense to plan them together. A one- or two-car garage usually takes one day and a large shop floor takes more, and you'll know the schedule for both before we start.

Looking for an epoxy garage floor in Abrams?

Most people start by searching for epoxy, and the instinct is right: a resin floor beats bare concrete in a Wisconsin garage. Epoxy is the older chemistry. We install a polyurea base coat with a polyaspartic topcoat, which cures in about a day instead of up to a week, stays clear in sunlight instead of yellowing, and holds up better to hot tires and cold. Epoxy vs. polyaspartic, compared →

Stained bare concrete garage floor before and after a full-broadcast flake coating — after
Stained bare concrete garage floor before and after a full-broadcast flake coating — before
Example
A stained, cracked garage floor, ground, repaired and coated with a full-broadcast flake system. Drag the slider. Example images, not a customer's job; photos from local jobs replace them as we finish them.

What we coat in Abrams

Garage floors →Basement floors →Shops and pole barns →Commercial floors →Patios, porches and pool decks →Full flake →Partial flake →Solid color →

Floors are $6–$9 per square foot installed with a $2,000 minimum ($7–$10 for patios and porches), with extra for heavy crack repair or grinding off an old coating. Garage floor coating cost →

Where we coat floors in Abrams

Abrams, Oconto County. Our shop is in Suamico.Open in Google Maps →
Abrams questions

Garage floor coating questions

We just poured a pole building floor in Abrams. When can it be coated?

After it has cured at least about a month. New concrete is still giving off water, and a coating put down too soon traps that moisture underneath. Send photos and the pour date, and we'll test the slab before we coat. If the building isn't heated, plan on a late spring to early fall install. More on shop and pole barn floors.

Do you bring flake samples out to Abrams?

Yes. We bring real flake samples to your garage or shop, because colors on a screen never match a floor. Look at them in your own light, since the same blend can read darker in a dim shop than in a bright garage. Blends with some tan or brown in them hide dried mud and dust well.

Will ATV tires and trail mud hurt a coated garage floor in Abrams?

Not a properly bonded one. Abrams is a gateway to the Machickanee Forest and Oconto River area, and whatever comes home from the woods lands on the garage floor. Rubber tires roll on a coated floor without harming it, and mud and melting snow stay on top until you sweep or hose them out. Grit can be added where the floor stays wet. Metal dragged across any coating can scratch it, so set a trailer jack or plow blade down instead of sliding it.

Sunken concrete in Abrams too?

We lift driveways, aprons, walks, patios and steps with foam, and a settled apron gets lifted before the floor is coated.

Concrete leveling in Abrams →

Garage floor coatings nearby (Door County & Northeast): Sturgeon Bay · Luxemburg · Kewaunee · Algoma · Shawano · Oconto · Oconto Falls

Farther out: Green Bay · De Pere · Suamico · Howard · Ashwaubenon · Allouez · Bellevue · Ledgeview · Hobart · Pulaski · Appleton · Kaukauna · Little Chute · Kimberly · Neenah · Menasha · Freedom · Wrightstown

Get your Abrams floor price from photos

Send a photo of the floor and its size. You'll get a firm price by text or email within 24 hours.

Get My PriceCall (920) 655-2193