Skip to content
(920) 655-2193|Serving Green Bay & Northeast Wisconsin
Rise & Grind Concrete
Get My Price
Brown County · Polyurea flake floors

Garage Floor Coatings in Bellevue, WI

From homes along the East River to neighborhoods built since the 1990s, we coat Bellevue garage and basement floors with a polyurea base coat, full flake and a polyaspartic topcoat.

The short answer

Yes, we coat garage floors in Bellevue with a polyurea flake system, the upgrade most people mean when they ask for an epoxy floor. The concrete is diamond ground and repaired, then gets a polyurea base coat, a full broadcast of flake and a clear, UV-stable polyaspartic topcoat. It's $6–$9 per square foot installed, so a 24 × 24 two-car garage runs $3,456–$5,184. Most one- and two-car garages are done in a day, and you can park after 24 to 48 hours.

By Rob Diederich, owner · Updated
Prep
Diamond grind, CSP 2–3
Install
Usually 1 day
Park on it
24–48 hours
Price
$6–$9 per sq ft

Garage floors in Bellevue

Before salt pitting spreads

Bellevue more than doubled in size between 1990 and 2020, so many garage floors here have been through 10 to 35 winters. That's about when salt pitting starts to show at the door and where the tires sit. Coating before the pitting spreads means less patching, and the polyaspartic topcoat keeps brine on the surface from then on.

Cracks from shifting clay

Where a garage slab sits on clay that swells and shrinks, it tends to crack, and sometimes a panel drops at a joint. Cracks are filled before the base coat goes down, and a sunken panel gets lifted first. A crack that's still moving can show through any coating, so we tell you up front if one looks active.

Basements on damp ground

Near the East River and its creeks, the ground around a basement can stay damp for long stretches, and the floor is where it shows: a dark ring under a rug, or paint that bubbles and peels. We test the slab for moisture before we quote. A damp reading usually means a moisture-tolerant base coat, and water that comes in as a puddle gets fixed first.

Looking for an epoxy garage floor in Bellevue?

Most people start by searching for epoxy, and the instinct is right: a resin floor beats bare concrete in a Wisconsin garage. Epoxy is the older chemistry. We install a polyurea base coat with a polyaspartic topcoat, which cures in about a day instead of up to a week, stays clear in sunlight instead of yellowing, and holds up better to hot tires and cold. Epoxy vs. polyaspartic, compared →

Stained bare concrete garage floor before and after a full-broadcast flake coating — after
Stained bare concrete garage floor before and after a full-broadcast flake coating — before
Example
A stained, cracked garage floor, ground, repaired and coated with a full-broadcast flake system. Drag the slider. Example images, not a customer's job; photos from local jobs replace them as we finish them.

What we coat in Bellevue

Garage floors →Basement floors →Shops and pole barns →Commercial floors →Patios, porches and pool decks →Full flake →Partial flake →Solid color →

Floors are $6–$9 per square foot installed with a $2,000 minimum ($7–$10 for patios and porches), with extra for heavy crack repair or grinding off an old coating. Garage floor coating cost →

Where we coat floors in Bellevue

Bellevue, Brown County. Our shop is in Suamico.Open in Google Maps →
Bellevue questions

Garage floor coating questions

A crack in my Bellevue garage floor keeps getting wider. Will a coating cover it?

We fill the crack before coating, and the coating goes over the repair. If the crack is still opening because the soil under it is moving, it can come back through any coating, so we'll tell you if it looks active. If one side has dropped, we lift that panel first so the floor is even. More on garage floor leveling.

Is a basement near the East River in Bellevue too damp to coat?

Usually not. We decide by testing your slab for moisture before we quote, since water vapor coming up through the floor is what loosens coatings. A slab that reads damp gets a base coat made for it, and water that pools on the floor or backs up through a drain needs to be fixed before we coat.

Should I coat my Bellevue garage floor now or wait until it looks worse?

Sooner is easier. A floor with light salt marks and a few hairline cracks needs less repair than one with deep pitting, so prep goes faster and the finished floor shows fewer patches. If your house is brand new, give the slab at least about a month to cure first.

Sunken concrete in Bellevue too?

We lift driveways, aprons, walks, patios and steps with foam, and a settled apron gets lifted before the floor is coated.

Concrete leveling in Bellevue →

Garage floor coatings nearby (Greater Green Bay): Green Bay · De Pere · Suamico · Howard · Ashwaubenon · Allouez · Ledgeview · Hobart · Pulaski · Wrightstown

Farther out: Abrams · Oconto · Appleton · Kaukauna · Little Chute · Kimberly · Neenah · Menasha · Freedom · Sturgeon Bay · Luxemburg · Kewaunee · Algoma · Shawano · Oconto Falls

Get your Bellevue floor price from photos

Send a photo of the floor and its size. You'll get a firm price by text or email within 24 hours.

Get My PriceCall (920) 655-2193