Skip to content
(920) 655-2193|Serving Green Bay & Northeast Wisconsin
Rise & Grind Concrete
Get My Price
Learn · Concrete Lifting

Concrete Leveling Types Explained: Which Kind of Leveling Is on Your Quote?

LiftRaises it from below;foam fills the voidFixes itSelf-levelerA thin wedge on top ofan indoor floorHides itGrindShaves the high side;small, stable lipsHides itReplaceTear out and pournew on a new baseFixes it
The short answer

"Concrete leveling" gets used for five different jobs. Slab lifting raises a sunken slab from underneath. Self-leveling underlayment pours a thin layer over an indoor floor so new flooring lies flat. Grinding shaves down lips and high spots. Resurfacing bonds a new wearing surface onto a sound slab. Replacement tears it out and starts over.

By Rob Diederich, owner · Updated
Sunken concrete & liftingBy , ownerPublished Updated 13 min readMudjackingRepair or replace
In this article (12 sections)

Ask three companies to "level" the garage approach that sank last spring, and the quotes come back nowhere close: one says drill and inject, one says grind and bevel, one says prime and pour. Those aren't three prices for one job. They're three different jobs that answer to the same word, and only one of them deals with the meltwater running at your garage door. That one is slab lifting, which is what we do when we're hired for concrete leveling in Green Bay. Here's how to tell them apart, what each costs, and which one a sunken slab actually needs.

In Green Bay or Northeast Wisconsin? Get a firm price from photos. Send three photos of the slab and we'll text you a price for the lift. How we do it, what it costs and what the warranty covers is on our concrete leveling page.

First, "Level" Usually Isn't the Goal

  • Level means horizontal. Set a marble down and it stays put.
  • Flat means no humps, dips, or lips, whether the surface is horizontal or sloped.

Outdoor concrete should be flat but almost never level, because it has to shed water. The International Residential Code, a national model code, calls for paved surfaces within 10 feet of a house to fall away at least 2 percent. That's about 1/4 inch per foot, or roughly an inch of drop across a 4-foot level.

Indoors, flatness is what counts. The tile installation standard (ANSI A108.02) wants the floor under typical tile within 1/4 inch over 10 feet, and within 1/8 inch over 10 feet for tile with any edge 15 inches or longer.

So when someone offers to "level" your patio, ask: level, or back to the right slope?

Five Jobs That All Get Called "Leveling"

JobWorks fromMoves the slab?What happens to height
Slab liftingUnderneathYes, up onlyThe whole slab rises
Self-leveling underlaymentOn topNoAdds a thin layer
GrindingThe high edgeNoRemoves concrete
Resurfacing / overlayOn topNoAdds a thin layer
ReplacementEverythingIt's a new slabStarts over

What each one costs around Green Bay

JobTypical priceWhere the number comes from
Foam slab lifting (us)$300 minimum; on average $4–$10 per sq ft. A sidewalk panel $300–$600, a garage apron $400–$1,000, a patio $600–$1,500Our price sheet
MudjackingAbout $3–$6 per sq ft nationallyHomeAdvisor's range, in our cost guide
GrindingPriced per lip, usually the cheapest line on a quoteVaries by contractor; ask for the length of the ground strip
Self-leveler or overlayPriced per square foot of floor, materials plus laborVaries by product; interior-only products don't belong outdoors
Tear out and replaceAbout $9–$20 per sq ft for a driveway around Green Bay, tear-out includedOur estimate of the local range for tear-out and repour, from Green Bay contractor pricing we checked in November 2026; not a quote for your job. More in our Green Bay cost guide

Lifting and replacement are the two that move a sunken slab, and lifting runs about half the price on average. Grinding and overlays are cheaper because they solve a different, smaller problem.

3D render, not a job video. It's a generic example, a driveway slab that sank at the garage door; the steps are the same on any slab. The ground is cut away so you can see under the slab; nothing is dug on a real job. Simplified to four ports; a real 10 by 10 foot section usually gets six to ten. The foam's weight, strength and set time, with sources, are in how foam lifting works.

Transcript: what the video shows (23 seconds, no sound)
  1. 1. Set the line. A laser line off the slab that didn't move shows how far the low one has to come up. This one sank about 2″, a little more at the corner.On screen: About 2″ low; Laser line = target; Empty space under the slab.
  2. 2. Drill and set the ports. 5/8″ holes, kept in from the edges, then a plastic injection port tapped into each one so the gun can lock on.On screen: Injection ports.
  3. 3. Pump the foam. Two liquids travel down separate hoses and mix in the gun. They go in through the first port and run to the lowest spots.On screen: Liquid runs to the low spots.
  4. 4. Expand and fill. Within seconds the mix expands 15 to 22 times its liquid volume and fills most of the space from that port. The next port fills the rest, pressing loose soil tight.On screen: Expands from the first port; Second port fills the rest.
  5. 5. Lift to the line. Once the space is full, short shots, port to port, raise the slab evenly. We stop when it meets the line.On screen: Short shots, port to port; Back on the line.
  6. 6. Patch and caulk. The ports come out, each hole is packed with grout and troweled flush, and the joint at the garage gets a bead of flexible sealant.On screen: Garage joint caulked.

1. Slab Lifting: Raising the Slab From Below

What it physically does: A contractor pumps material into the empty or soft space under a sunken slab until the slab is supported, then keeps pumping until it rises back to height. You keep your concrete. Only what's under it changes. You'll also hear it called concrete jacking or slab jacking, and some people call it cement leveling.

What it fixes: Slabs that went down. A lip at a joint, a garage approach tipped toward the door, a patio draining at the foundation, a walk that rocks.

What it can't do: Lower a slab, put broken-up concrete back together, or change the surface. Scaling, stains, and cracks ride along.

Three methods, with overlapping names:

  • Polyjacking (foam lifting): high-density structural polyurethane foam injected through 5/8" holes, about the size of a dime. It's the only method we use, and our polyjacking page shows how we do it.
  • Mudjacking: a cement and soil or sand slurry pumped through holes typically 1–2" across. Plenty of people call this slabjacking, though some contractors use that word for any lifting method.
  • Stone slurry grout: a crushed limestone slurry pumped through holes of about 1".

Foam is the modern take on mudjacking: the same idea, with a far lighter fill and smaller holes. We compare them head to head in how concrete lifting works and foam vs. mudjacking.

Ask so you know it's really a lift:

  • "What goes under the slab, and what size are the holes?"
  • "Which slabs are you raising, and to what?" "To match the garage floor and fall away from the door" is a lift answer.
  • "What happens if a slab cracks or won't move?"
  • "When can I drive on it, and what does your warranty cover?"
Foam: about 5/8"Roughly dime-sizedMudjacking: about 1-1/2" to 2"Dashed ring = 1-1/2", solid = 2"DRAWN TO SCALE
DRAWN TO SCALEFoamabout 5/8"Roughly dime-sizedMudjackingabout 1-1/2" to 2"Dashed 1-1/2", solid 2"

2. Self-Leveling Underlayment: Smoothing an Indoor Floor

What it physically does: A runny, cement-based mix gets poured over a primed slab and flows out flat on its own. One contractor-grade product we checked goes 1/8" to 2" in a single pour, is labeled for interior use only, isn't meant to be a wear surface, and gives you about 15–20 minutes of working time at 70°F.

What it fixes: A stable indoor floor that's too wavy for tile or plank. Old patches, rough transitions, a dip where a wall used to stand.

What it can't do: Raise a sunken slab (the void stays), stop a moving crack (that data sheet says not to pour over one), hold up outdoors, or serve as the finished floor. It also seeks level by design, which is perfect under tile and wrong for an apron that needs to shed water.

A Wisconsin trap: a garage counts as indoors on paper, but a Green Bay garage gets salt slush, freezing temperatures, and tire traffic. That's not the dry interior floor these products are typically labeled for.

Ask so you know what you're getting:

  • "Is this product rated for this location?" Interior dry area, garage, and exterior are three different answers.
  • "What's the thinnest it can go?" Feather edges at doors and drains are where thin layers break.
  • "What goes on top of it?" If the answer is "nothing," ask why an underlayment is being sold as a floor.
  • "Is the slab still moving?" If it rocks or the dip keeps growing, it needs to come up first.

More in self-leveling concrete problems.

3. Grinding: Taking Down the High Side

What it physically does: A diamond grinder or specialty saw removes concrete from the high edge or spot, turning a sharp lip into a short ramp. You'll also hear shaving, beveling, or trip-hazard cutting.

What it fixes: Small lips on a walk that's otherwise solid, ridges on a floor before flooring goes down, and a heaved edge that lifting can't bring down. On accessible routes, ADA standards allow a 1/4" to 1/2" edge only if it's beveled no steeper than 1:2, so grinding a bevel is a standard fix for small lips.

What it can't do: Raise anything or fill a void. If the low slab is still sinking, the lip comes back. A big offset becomes a long, lighter-colored ground strip that can expose the stone inside the concrete. And don't grind a raised edge in March: if frost pushed it up, it may settle back by June. See frost heave vs. settling.

Ask so you know what you're getting:

  • "Which slab are you grinding, and how long will the ground area be?"
  • "How do you control the dust?" Grinding concrete throws silica dust. Federal OSHA construction rules list two setups for handheld grinders: a built-in water feed (outdoors only) or a shroud hooked to a dust collector. A crew with neither is a red flag.
  • "Will the lip come back?" If the low slab sank, the honest answer is "maybe."

4. Resurfacing and Overlays: A New Top on an Old Slab

What it physically does: A thin layer of polymer-modified cement gets bonded to the existing slab. Common bagged resurfacers run from a feather edge to about 1/2".

What it fixes: A slab that sits where it belongs but has a worn, scaled, or patchy surface.

What it can't do: Fix sinking or rocking, because the overlay follows the slab. Make up a big drop. Stop old cracks from coming back: one resurfacer data sheet we checked says reflective cracking can't be completely prevented and is more likely where the slab has settled. That same sheet says not to apply over painted or sealed concrete.

Wisconsin reality

water that gets under a thin layer freezes and pries it up, and salt attacks the surface, which is all an overlay is. The data sheets we checked want air and concrete at 45–50°F or warmer. Green Bay's normal overnight lows don't clear 50°F until June and slide back toward it by September, so outdoor resurfacing here is a summer job.

Ask so you know what you're getting:

  • "Is it rated for exterior freeze-thaw and deicers?"
  • "How will you prep?" Data sheets call for high-pressure washing or mechanical roughening, then dampening. A quick rinse isn't prep.
  • "How will the joints be carried through, and how much height does it add at the garage door?"

More in pouring over existing concrete.

5. Replacement: Starting Over

What it physically does: The old slab gets saw-cut, broken out, and hauled away. The base gets fixed (or should), then new air-entrained concrete is formed and poured.

What it fixes: Concrete broken into many pieces or crumbling, a slab built with the wrong slope, a heaved slab you can't live with, a new layout.

What it can't do: Fix the soil and water on its own (a new slab on the same washed-out base can sink too), match the old concrete's color, or be used right away. Plan on about a week before you park on it and no deicers its first winter.

Ask: "Why did the old one fail, and what are you doing differently?" Then work through our questions to ask before replacing concrete.

Same Problem, Four Quotes: A Worked Example

Back to that garage approach, with a fourth quote added for replacement. Say it runs 10 feet from the garage door to the next joint, and the garage end has dropped 1-1/4" below the garage floor. To hit the 2 percent target, it should fall about 2-1/2" away from the garage over those 10 feet.

QuoteWhat it would doWater drains away afterward?
Self-leveling overlayFill the low end up to the garage floor, feathering out to nothingNo. It flows level, the void stays, and an interior product won't last on an apron
GrindingGrind the garage floor edge into a ramp down to the sunken slabNo. You'd cut into good concrete, and water still runs at the door
Foam liftingRaise the slab to meet the garage floor and pitch it away, filling the voidYes
ReplacementPour a new slab at the right pitchYes, if the base gets fixed too

Two of the four quotes solve a different problem. Compare the other two.

Read the Quote: Words That Tell You Which Job It Is

If the quote says...You're probably looking at...Confirm
Drill, inject, foam, polyurethane, pounds of materialFoam liftingHole size, which slabs, target height and slope
Pump, slurry, grout, mudjack, slabjackMudjacking or stone slurryMaterial, hole size, wait before driving
Grind, shave, bevel, trip-hazard removalGrindingWhich slab, size of the ground area, dust control
Prime, pour, SLU, underlaymentSelf-leveling underlaymentInterior or exterior rating, what goes on top
Resurface, overlay, skim coat, microtoppingResurfacingThickness, exterior rating, joints
Saw-cut, demo, haul-off, R&R, forms, baseReplacementThickness, base prep, air entrainment, permit
Patch, ramp, taper, fill the lipPatch mortar troweled over the edgeExpect it to break loose outdoors
Just "level"Any of the aboveAsk which one

If Your Problem Is..., You Need...

If your problem is...You need...Not...
One slab dropped at a jointLiftingA patch ramp or outdoor self-leveler
A slab that rocks or sounds hollowLifting, which fills the voidAn overlay, which bridges over it
Garage approach or patio tipped toward the houseLifting to restore the pitchSelf-leveler, grinding, or resurfacing
Crack with one side higherLift the low side, then seal the crackCaulk alone
A small lip on a solid walk that isn't movingGrinding, or lifting the low sideReplacement
Slab pushed up by tree rootsGrind a small lip, lift the neighbors to blend it, or replaceLifting the high slab, which can't lower it
Wavy indoor floor getting tile or plankSelf-leveling underlayment, high spots groundLifting, unless the slab sank
Scaled surface on a slab that sits rightCleaning and a penetrating sealer; resurfacing if looks matterLifting
Pitted, stained garage floor that isn't movingA garage floor coating, with crack repair in the prepSelf-leveler as the finished floor
Broken into pieces, crumbling, or built with the wrong slopeReplacementLifting or an overlay
Open joints or a gap at the houseFlexible joint caulkingMortar packed into the joint

Glossary: Concrete Leveling Terms

Void: An empty or soft pocket under a slab where soil washed out, packed down, or rotted away. Rocking and hollow sounds come from voids. Lift: Raising a slab from underneath. Also the distance it rose, as in "a one-inch lift." Heave: Upward movement. Frost heave comes and goes with the seasons. Root heave keeps building. Offset: The height difference between two slabs, or between the two sides of a crack. Measure it at the low side. Overlay: Any new layer bonded or placed on top of existing concrete. Resurfacers are overlays. Underlayment: A layer made to be covered by flooring, not walked on as the finished surface. Polyjacking: Lifting a slab with polyurethane foam injected through small holes. Slabjacking: Lifting a slab by pumping material under it. Most often used to mean mudjacking. Pitch: The slope built into a slab so water drains off it.

Getting Leveling Quotes in Green Bay

What a lift costs. Our lifting jobs start at a $300 minimum, and on average land between $4 and $10 per square foot, set by how far the slab has sunk, the void under it and its size. On average that's about half of what tear-out and replacement runs around Green Bay. A single sidewalk panel or AC pad is usually $300–$600, a garage apron $400–$1,000, a patio $600–$1,500. The full sheet, with what moves a job up or down, is on our concrete leveling cost page.

When it happens. Lifting runs from the spring thaw, usually late April, until the ground freezes in November. Photo quotes are answered all winter, so a slab you notice in January can have a firm price and a spot at the front of the spring schedule before the frost is out.

What you're buying. Every lift carries a 5-year re-lift warranty, the holes are 5/8 inch and patched flush, and you deal with the owner from the first photo to the finished slab. Our concrete leveling service covers every surface we lift, and the town pages for Green Bay, De Pere, Howard, Suamico, Ashwaubenon, Bellevue and Allouez cover what's different about the ground in each.

Questions

Common questions

Why did contractors give me such different prices to level the same slab?

Usually because they quoted different jobs. Check each quote against the word table above. Drilling and injecting is a lift, grinding takes down a high edge, and priming and pouring is an overlay. Compare lift to lift.

Is slabjacking the same thing as mudjacking?

Most of the time, yes. Some contractors use "slabjacking" for any method that raises a slab from below, foam included. Ask what goes under the slab and how big the holes are.

Can two kinds of leveling be combined?

Often that's the right answer. Lift a sunken garage slab, then coat it. Lift the low slabs, then grind a small leftover lip. Fix the slab's position first and its surface second.

Which kind of leveling do you do?

Foam lifting only, plus joint and crack caulking, cleaning and sealing, and garage floor coatings. If your photos show a grinding, overlay, or replacement job, we'll tell you that and what to ask for.

When should I get leveling quotes in Wisconsin?

After the frost is out. A slab can sit higher in March than it will in June, which throws off every measurement. Lifting runs from spring thaw to freeze-up, and outdoor overlays need summer temperatures.

Keep reading

Related

Polyurethane foam lifting
Concrete Leveling

Sunken sidewalk, driveway, patio or steps? We lift concrete with foam through dime-size holes. Drive on it the same day. Send photos for a free quote.

Pricing · Concrete leveling
Concrete Leveling Cost

Concrete leveling cost in Green Bay: our foam lifting prices by job, from a $300 minimum, next to national averages, and what moves the price.

Learn · Concrete Lifting
How Does Concrete Lifting Work?

How concrete lifting works, step by step: why slabs sink around Green Bay, foam vs. mudjacking vs. stone slurry vs. replacement, what a lift costs, and what lifting can't fix.

Learn · Concrete Lifting
Concrete Grinding vs. Lifting

Grinding shaves down a lip; lifting raises a slab that sank. When each is the right fix, when you need both or neither, and the tradeoffs nobody quotes.

Learn · Garage Floor Coatings
How to Level a Concrete Floor

How to level a garage or basement floor: measure first, find the cause, then lift, grind, patch, or overlay. Plus why a garage floor shouldn't be level.

Find Out Which Fix You Actually Need. No Sales Call.

Send a wide photo of the area, a close-up of the worst edge with a tape measure standing at the low side, and a sentence about what bugs you (the lip, the puddle, the looks). We'll tell you which kind of leveling it needs, whether that's us, and what it costs if it is.

Get My PriceCall (920) 655-2193

Or read more about foam concrete lifting →.